Centre Pull Tab Plugs

SR 1110
Orange LDPE

TO ASSURE PROPER FIT
()Plugs
Plug dimension “A” should be approx.
1% larger than the inner diameter of the part.
Minimum of .020″

Part Number	Use as a Plug				Use as a Cap						Bulk Pack Qty
	A		B		C		D		E
	In	mm	In	mm	In	mm	In	mm	In	mm
CP6A	0.335	8.51	0.267	6.78	0.469	11.91	0.406	10.32	0.625	15.88	5000
CP9A	0.428	10.87	0.362	9.19	0.594	15.08	0.375	9.53	0.750	19.05	7000
CP10A	0.463	11.76	0.402	10.21	0.625	15.88	0.375	9.53	0.750	19.05	6000
CP14A	0.500	12.70	0.567	14.40	0.720	18.30	0.469	11.90	0.811	20.60	7500
CP12A	0.512	13.00	0.448	11.38	0.656	16.67	0.406	10.32	0.563	14.29	5000
CP18A	0.579	14.70	0.669	17.00	0.811	20.60	0.531	13.50	0.752	19.10	5500
CP19A	0.610	15.50	0.697	17.70	0.839	21.30	0.531	13.50	0.780	19.80	5000
CP24A	0.610	15.50	0.827	21.00	1.000	25.40	0.591	15.00	0.839	21.30	5000
CP31A	0.973	24.71	0.869	22.07	1.120	28.45	0.750	19.05	1.000	25.40	4000
CP40A	1.028	26.10	1.146	29.10	1.339	34.00	0.752	19.10	1.000	25.40	2500
CP37A	1.092	27.74	0.967	24.56	1.250	31.75	0.780	19.81	1.030	26.16	2500
CP42A	1.094	27.80	1.220	31.00	1.409	35.80	0.780	19.80	1.000	25.40	2500
CP44A	1.150	29.20	1.287	32.70	1.551	39.40	0.752	19.10	1.000	25.40	2000
CP47A	1.356	33.22	1.292	32.82	1.500	38.10	0.781	19.84	1.000	25.40	1800
CP49A	1.311	33.30	1.465	32.70	1.622	41.20	0.752	19.10	1.000	25.40	1800
CP51A	1.527	38.79	1.344	34.14	1.750	44.45	0.880	22.35	1.000	25.40	1500
CP55A	1.601	40.67	1.451	36.86	1.750	44.45	0.750	19.05	1.000	25.40	1500
CP56A	1.735	44.07	1.615	41.02	1.906	48.42	0.719	18.26	1.125	28.58	1000
CP57A	1.938	49.23	1.807	45.90	2.160	54.86	1.000	25.40	1.250	31.75	1000

PLUG	CAPS
Plug dimension “A” should be approx. 1% larger than the inner diameter of the part. Minimum of .020″	Cap dimension “E” should be approx. 1% smaller than the outside diameter of the part. Minimum of .020″

Related products