Wide Flange Caps/Plugs

SR 1115
Low-Density Polyethylene

Wider flange assures added protection on bearing surfaces
Wider flange keeps plug from being accidently pushed downthru the mating part
The tapered design allows the part to plug multiple inner
diameters or cap multiple outside diameters

TO ASSURE PROPER FIT

PLUG	CAPS
Cap dimension “E” should be approx. 1% smaller than the outside diameter of the part. Minimum of .020″	Plug dimension “A” should be approx. 1% larger than the inner diameter of the part. Minimum of .020″

Category: Hydraulic & Pneumatic Fittings

Description

Part Number	Use as a Cap							Use as a Plug							Color	Pack Qty.	Bulk Pack
	A		B		C		D		E		F		G
	In	mm	In	mm	In	mm	In	mm	In	mm	In	mm	In	mm
LF2A	0.240	6.10	0.173	4.39	0.562	14.27	0.465	11.81	0.111	2.82	0.177	4.50	0.090	2.29	Blue	1	5500
LF-3	0.290	7.37	0.236	5.99	0.485	12.32	0.402	10.21	0.146	3.71	0.245	6.22	0.090	2.29	Blue	1	5000
LF-6	0.418	10.62	0.367	9.32	0.740	18.80	0.402	10.21	0.298	7.57	0.354	8.99	0.090	2.29	Blue	1	5000
LF-10	0.547	13.89	0.481	12.22	0.870	22.10	0.460	11.68	0.409	10.39	0.493	12.52	0.090	2.29	Blue	1	7000
LF-11X	0.631	16.03	0.565	14.35	0.950	24.13	0.491	12.47	0.500	12.70	0.580	14.73	0.090	2.29	Blue	1	5000
LF-12X	0.687	17.45	0.610	15.49	1.031	26.19	0.527	13.39	0.548	13.92	0.635	16.13	0.090	2.29	Blue	1	4500
LF-13	0.725	18.42	0.628	15.95	1.062	26.97	0.528	13.41	0.558	14.17	0.667	16.94	0.090	2.29	Yellow	1	5000
LF-15X	0.812	20.62	0.725	18.42	1.140	28.96	0.580	14.99	0.662	16.81	0.765	19.43	0.090	2.29	Blue	1	3000
LF-17	0.920	23.37	0.820	20.83	1.250	31.75	0.621	15.77	0.741	18.82	0.865	21.97	0.090	2.29	Blue	1	2300
LF18A	0.975	24.77	0.867	22.02	1.281	32.54	0.650	16.51	0.805	20.45	0.913	23.19	0.090	2.29	Blue	1	4000
LF-19	1.020	25.90	0.950	24.13	1.344	34.13	0.715	18.16	0.875	22.22	0.957	24.30	0.090	2.29	Blue	1	1500
LF-28	1.890	48.01	1.730	43.94	2.312	58.72	0.745	18.92	1.650	41.91	1.825	46.36	0.120	3.05	Blue	1	1100

Product Enquiry

Select at least 2 products
to compare